- Generated by
1.8.1.1
|
GCC Middle and Back End API Reference
|
Data Structures | |
| struct | map_value |
| struct | mapping |
| struct | iterator_group |
| struct | iterator_use |
| struct | attribute_use |
| struct | subst_attr_to_iter_mapping |
Typedefs | |
| typedef struct mapping * | mapping_ptr |
| typedef struct iterator_use | iterator_use |
| typedef struct attribute_use | attribute_use |
Functions | |
| static void | validate_const_int (const char *) |
| static rtx | read_rtx_code (const char *) |
| static rtx | read_nested_rtx (void) |
| static rtx | read_rtx_variadic (rtx) |
| static int | find_mode () |
| static void | apply_mode_iterator () |
| static int | find_code () |
| static void | apply_code_iterator () |
| static int | find_int () |
| static void | apply_int_iterator () |
| static void | apply_subst_iterator () |
| static void | bind_subst_iter_and_attr () |
| static char * | find_subst_iter_by_attr () |
| static struct map_value * | map_attr_string () |
| static const char * | apply_iterator_to_string () |
| static rtx | copy_rtx_for_iterators () |
| static const char * | add_condition_to_string () |
| static void | add_condition_to_rtx () |
| static void | apply_attribute_uses () |
| static int | add_current_iterators () |
| static void | apply_iterators () |
| static struct mapping * | add_mapping () |
| static struct map_value ** | add_map_value () |
| static void | initialize_iterators () |
| HOST_WIDE_INT | atoll (const char *) |
| HOST_WIDE_INT | atoll () |
| static void | read_conditions () |
| static void | validate_const_int () |
| static void | record_iterator_use () |
| static void | record_attribute_use (struct iterator_group *group, void *ptr, const char *value) |
| static void | record_potential_iterator_use (struct iterator_group *group, void *ptr, const char *name) |
| static struct mapping * | read_mapping () |
| static void | add_define_attr_for_define_subst () |
| static void | add_define_subst_attr () |
| static void | read_subst_mapping (htab_t subst_iters_table, htab_t subst_attrs_table, rtx *queue) |
| static void | check_code_iterator () |
| bool | read_rtx () |
| static rtx | read_rtx_code () |
| static rtx | read_rtx_variadic () |
Variables | |
| htab_t | subst_attr_to_iter_map = NULL |
| const char * | current_iterator_name |
| static struct iterator_group modes codes ints | substs |
| static vec< mapping_ptr > | current_iterators |
| static vec< iterator_use > | iterator_uses |
| static vec< attribute_use > | attribute_uses |
| typedef struct attribute_use attribute_use |
Vector definitions for the above.
| typedef struct iterator_use iterator_use |
Vector definitions for the above.
| typedef struct mapping* mapping_ptr |
Vector definitions for the above.
|
static |
Like add_condition, but applied to all conditions in rtx X.
References current_iterators, and mapping::current_value.
|
static |
Return a condition that must satisfy both ORIGINAL and EXTRA. If ORIGINAL has the form "&& ..." (as used in define_insn_and_splits), assume that EXTRA is already satisfied. Empty strings are treated like "true".
|
static |
A htab_traverse callback for iterators. Add all used iterators to current_iterators.
References iterator_group::apply_iterator, mapping::current_value, mapping::group, iterator_use::iterator, join_c_conditions(), map_value::number, iterator_use::ptr, map_value::string, and substs.
|
static |
For iterator with name ATTR_NAME generate define_attr with values 'yes' and 'no'. This attribute is used to mark templates to which define_subst ATTR_NAME should be applied. This attribute is set and defined implicitly and automatically.
|
static |
This routine generates DEFINE_SUBST_ATTR expression with operands ATTR_OPERANDS and places it to QUEUE.
References initialize_iterators(), modes, read_conditions(), and read_mapping().
|
staticread |
Add the pair (NUMBER, STRING) to a list of map_value structures. END_PTR points to the current null terminator for the list; return a pointer the new null terminator.
References gdbhooks::GET_RTX_NAME().
|
staticread |
Add a new "mapping" structure to hashtable TABLE. NAME is the name of the mapping and GROUP is the group to which it belongs.
|
static |
Apply the current iterator values to all attribute_uses.
|
static |
|
static |
|
static |
Apply the current iterator values to STRING. Return the new string if any changes were needed, otherwise return STRING itself.
Add everything between the last copied byte and the '<',
then add in the attribute value.
|
static |
Expand all iterators in the current rtx, which is given as ORIGINAL. Build a list of expanded rtxes in the EXPR_LIST pointed to by QUEUE.
Raise an error if any attributes were used.
Clear out the iterators from the previous run.
Mark the iterators that we need this time.
Get the list of iterators that are in use, preserving the
definition order within each group. Apply the current iterator values. Accumulate a condition to
say when the resulting rtx can be used. We apply subst iterator after RTL-template is copied, as during
subst-iterator processing, we could add an attribute to the
RTL-template, and we don't want to do it in the original one. Add the new rtx to the end of the queue.
Lexicographically increment the iterator value sequence.
That is, cycle through iterator values, starting from the right,
and stopping when one of them doesn't wrap around. At least one more rtx to go. Allocate room for it.
References iterator_group::apply_iterator, current_iterator_name, mapping::current_value, mapping::group, iterator_use::iterator, mapping::name, map_value::number, iterator_use::ptr, and substs.
|
static |
References validate_const_int().
|
static |
This routine adds attribute or does nothing depending on VALUE. When VALUE is 1, it does nothing - the first duplicate of original template is kept untouched when it's subjected to a define_subst. When VALUE isn't 1, the routine modifies RTL-template LOC, adding attribute, named exactly as define_subst, which later will be applied. If such attribute has already been added, then no the routine has no effect.
If we've already added attribute 'current_iterator_name', then we
have nothing to do now. Add attribute with subst name - it serves as a mark for
define_subst which later would be applied to this pattern.
| HOST_WIDE_INT atoll | ( | const char * | ) |
Provide a version of a function to read a long long if the system does not provide one.
| HOST_WIDE_INT atoll | ( | ) |
Return INT_MAX equiv on overflow.
|
static |
Map subst-attribute ATTR to subst iterator ITER.
|
static |
Check newly-created code iterator ITERATOR to see whether every code has the same format.
References HOST_WIDE_INT.
|
static |
Return a deep copy of X, substituting the current iterator values into any strings.
Create a shallow copy of ORIGINAL.
Change each string and recursively change each rtx.
|
static |
Implementations of the iterator_group callbacks for codes.
|
static |
Implementations of the iterator_group callbacks for ints.
Since GCC does not construct a table of valid constants, we have to accept any int as valid. No cross-checking can be done.
References current_iterator_name, and rtvec_def::elem.
|
static |
Implementations of the iterator_group callbacks for modes.
|
static |
Return name of a subst-iterator, corresponding to subst-attribute ATTR.
References iterator_group::attrs, mapping::group, and mapping::name.
Referenced by map_attr_string().
|
static |
Do one-time initialization of the mode and code attributes.
References HOST_WIDE_INT.
Referenced by add_define_subst_attr().
|
staticread |
Map attribute string P to its current value. Return null if the attribute isn't known.
Peel off any "iterator:" prefix. Set ATTR to the start of the
attribute name. If an iterator name was specified, check that it matches.
Find the attribute specification.
In contrast to code/mode/int iterators, attributes of subst
iterators are linked to one specific subst-iterator. So, if
we are dealing with subst-iterator, we should check if it's
the one which linked with the given attribute. Find the attribute value associated with the current
iterator value.
References find_subst_iter_by_attr(), and mapping::name.
|
static |
Process a define_conditions directive, starting with the optional
space after the "define_conditions". The directive looks like this:
(define_conditions [
(number "string")
(number "string")
...
])
It's not intended to appear in machine descriptions. It is
generated by (the program generated by) genconditions.c, and
slipped in at the beginning of the sequence of MD files read by
most of the other generators.
References attribute_use::group, and attribute_use::value.
Referenced by add_define_subst_attr().
|
staticread |
Finish reading a declaration of the form:
(define... <name> [<value1> ... <valuen>])
from the MD file, where each <valuei> is either a bare symbol name or a
"(<name> <string>)" pair. The "(define..." part has already been read.
Represent the declaration as a "mapping" structure; add it to TABLE
(which belongs to GROUP) and return it. Read the mapping name and create a structure for it.
Read each value.
A bare symbol name that is implicitly paired to an
empty string. A "(name string)" pair.
Referenced by add_define_subst_attr().
|
static |
Read a nested rtx construct from the MD file and return it.
Referenced by read_rtx_code().
| bool read_rtx | ( | ) |
Read an rtx-related declaration from the MD file, given that it starts with directive name RTX_NAME. Return true if it expands to one or more rtxes (as defined by rtx.def). When returning true, store the list of rtxes as an EXPR_LIST in *X.
Do one-time initialization.
Handle various rtx-related declarations that aren't themselves
encoded as rtxes. READ_SUBST_MAPPING could generate a new DEFINE_ATTR. Return
TRUE to process it.
|
static |
|
static |
Subroutine of read_rtx and read_nested_rtx. CODE_NAME is the name of either an rtx code or a code iterator. Parse the rest of the rtx and return it.
Linked list structure for making RTXs:
If this code is an iterator, build the rtx using the iterator's
first value. If we end up with an insn expression then we free this space below.
If what follows is `: mode ', read it and
store the mode in the rtx. 0 means a field for internal use only.
Don't expect it to be present in the input. 'V' is an optional vector: if a closeparen follows,
just store NULL for this element. Now process the vector.
Obstack to store scratch vector in.
Add expressions to a list, while keeping a count.
close bracket gotten
'S' fields are optional and should be NULL if no string
was given. Also allow normal 's' and 'T' strings to be
omitted, treating them in the same way as empty strings. The output template slot of a DEFINE_INSN,
DEFINE_INSN_AND_SPLIT, or DEFINE_PEEPHOLE automatically
gets a star inserted as its first character, if it is
written with a brace block instead of a string constant. For insn patterns, we want to provide a default name
based on the file and line, like "*foo.md:12", if the
given name is blank. These are only for define_insn and
define_insn_and_split, to aid debugging. Find attr-names in the string.
Here we should find linked subst-iter.
Prefer atoll over atoq, since the former is in the ISO C99 standard.
But prefer not to use our hand-rolled function above either. Can be an iterator or an integer constant.
Syntactic sugar for AND and IOR, allowing Lisp-like
arbitrary number of arguments for them.
References fatal_expected_char(), read_nested_rtx(), and unread_char().
|
static |
Mutually recursive subroutine of read_rtx which reads (thing x1 x2 x3 ...) and produces RTL as if (thing x1 (thing x2 (thing x3 ...))) had been written. When called, FORM is (thing x1 x2), and the file position is just past the leading parenthesis of x3. Only works for THINGs which are dyadic expressions, e.g. AND, IOR.
|
static |
Read define_subst_attribute construction. It has next form:
(define_subst_attribute <attribute_name> <iterator_name> <value1> <value2>)
Attribute is substituted with value1 when no subst is applied and with
value2 in the opposite case.
Attributes are added to SUBST_ATTRS_TABLE.
In case the iterator is encountered for the first time, it's added to
SUBST_ITERS_TABLE. Also, implicit define_attr is generated. Add element to the queue.
|
static |
Record that PTR uses attribute VALUE, which must match a built-in value from group GROUP.
|
static |
Record that PTR uses iterator ITERATOR.
|
static |
Interpret NAME as either a built-in value, iterator or attribute for group GROUP. PTR is the value to pass to GROUP's apply_iterator callback.
Copy the attribute string into permanent storage, without the
angle brackets around it.
|
static |
Referenced by apply_mode_iterator().
|
static |
|
static |
The list of all attribute uses in the current rtx.
| const char* current_iterator_name |
This global stores name of subst-iterator which is currently being processed.
Referenced by apply_iterators(), and find_int().
|
static |
All iterators used in the current rtx.
Referenced by add_condition_to_rtx().
|
static |
The list of all iterator uses in the current rtx.
| htab_t subst_attr_to_iter_map = NULL |
Hash-table to store links between subst-attributes and define_substs.
|
static |
The mode and code iterator structures.
Referenced by add_current_iterators(), and apply_iterators().
1.8.1.1